Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

Two-carbon ring expansion of cyclobutanone skeletons by nickel-catalyzed intermolecular alkyne insertion

The reaction of cyclobutanone with an alkyne in the presence of a nickel(0) catalyst formally achieves intermolecular alkyne insertion between the carbonyl carbon and the α-carbon of a cyclobutanone, providing a six-membered carbocyclic skeleton.     

PtBr2-catalyzed consecutive enyne metathesis-aromatization of 1-(1-methoxy-but-3-enyl)-2-(1-alkynyl)benzenes: dual role of the Pt catalyst

1,7-Enynes 1, connected through an aromatic ring and bearing a leaving methoxy group at the 4-position, underwent the PtBr(2)-catalyzed enyne metathesis followed by aromatization in one pot to afford vinyl naphthalenes 3 in good to acceptable yields. The cyclobutene intermediate 11a and another intermediate 2a were isolated, indicating that PtBr(2) acts as a dual role catalyst: (1) as a transition metal catalyst, it induces the enyne metathesis to produce 11a starting from 1a, and (2) as a Lewis acid catalyst, it facilitates elimination of MeOH from 2a to give the aromatized product 3a.     

Electron attachment and vibrational excitation in hydrogen iodide: calculations based on the nonlocal resonance model

High resolution laser spectroscopy has been applied to study the hyperfine structure of excited energy levels of Thulium I. As part of our aim to complete the fine and hyperfine structure of the Tm I spectra 51 transitions in the visible were measured and precise values for the magnetic dipole hyperfine structure constants A of 24 odd and 19 even levels were determined. In addition, a new energy level of even parity with J = 3/2 is found at 27 509.40 (5)cm^?1 using laser induced fluorescence spectroscopy.     

A simple and easy access to 3-N-alkyl-5-vinyloxazolidinones mediated by palladium-phosphine catalysts

A new entry for the synthesis of 3-alkyl substituted 5-vinyloxazolidin-2-one derivatives 2 from cis-2-butenylene-1,4-dicarbonate 1 and primary amines mediated by palladium-phosphine catalysts is described. The scope and limitation, a plausible mechanism, and an asymmetric version of the reaction are also discussed.     

The surface of ordered mesoporous benzene-silica hybrid material: an infrared and ab initio molecular modeling study

Joint IR and computational results allow a detailed characterization of the surface properties of a mesoporous benzene-silica hybrid material with crystal-like wall structure. After outgassing at 450 degrees C, hydroxyl species mainly consist of noninteracting silanols, with both O-H and Si-O stretching modes at lower frequencies than those of SiOH in silica. Interaction with several probe molecules, followed both by experiment and calculus, shows that the aryl group in the coordination sphere of Si imparts a lesser acidity with respect to the isolated silanol in silica. In contrast, adsorption isotherms indicate that the interaction with acetone is stronger with benzene-silica than with silica: this is interpreted in terms of secondary interactions taking place between the slightly acidic CH in acetone and the electronic cloud in benzene-like rings. This suggests that both the inorganic component and the organic one play a role in dictating the surface behavior.     

Analysis of the interaction between human plasma fibronectin and gelatin by affinity electrophoresis

The interaction between human plasma fibronectin and gelatin was analyzed by affinity electrophoresis, in which the fibronectin was subjected to electrophoresis in a 4% polyacrylamide gel in the presence and absence of gelatin, as an affinity ligand, and the fibronectin band was stained by an immunoblotting method. The apparent dissociation constants (Kd) of fibronectin for gelatin were calculated from affinity plots based on the original affinity equation at different pHs, urea concentrations, and temperatures. The fibronectin exhibited much lower affinity in the presence of urea. The Kds at 37 degrees C were 1.49 X 10(-7) M, 2.50 X 10(-6) M, and 3.58 X 10(-6) M with 2 M, 3 M, and 4 M urea, respectively. The van't Hoff plots of Kd values against absolute temperature (T) showed that the value of log Kd decreased in proportion to the increase in the value of 1/T within the range of 15-50 degrees C. The standard enthalpy, the standard free energy change at 37 degrees C, and the entropy change at 37 degrees C for association were calculated to be -124.7 kJ/mol, -33.23 kJ/mol, and -295.1 J/mol/deg, respectively. These results suggest that a hydrophilic interaction, such as hydrogen bond or van der Waals interaction, plays an important role in the binding of plasma fibronectin to gelatin.     

Measurement of hyperfine structure constants,g values and tensor polarizability of excited states of Sm I

Atomic-beam laser spectroscopy with fluorescence detection is applied to investigate the hyperfine structure (hfs), Stark and Zeeman effects of the electric dipole transitions of Sm i. The measurements are performed for the four transitions of 0 → 15650.55, 292.58 → 15650.55, 292.58 → 15567.32, and 1489.55 → 16890.59 cm^-1. The hfs constants of the upper and lower levels and the isotope shifts of the transitions are determined. The tensor polarizability of the 15650.55 cm^-1 level is found to be α₂ = -556.2 ± 11.8 kHz/(kV/cm)². Thanks to the accurate g values of the lower levels [Childs, W.J., Goodman, L.S.: Phys. Rev. A 6, 2011 (1972)], the g values of the upper levels are obtained from the observed Zeeman splittings. The values are found to be -0.115907(79), 2.22259(20) and 1.599968(51) for the 15650.55 cm^-1 .1, 15567.32 cm^-1 and 16890.59.cm^-1 levels, respectively.     

Optical sensor for carbon dioxide combining colorimetric change of a pH indicator and a reference luminescent dye

A new optical CO₂ sensor based on the luminescence intensity change of the europium(III) complex tris(thenoyltrifluoroacetonato) europium(III) dihydrate ([Eu(tta)₃]) caused by the absorption change of various pH indicators—thymol blue, phenol red, or cresol red—with CO₂ was developed and its CO₂ sensing properties were investigated. For all the CO₂ sensors using pH indicators the observed luminescence intensity from [Eu(tta)₃] at 613 nm increased with increasing CO₂ concentration. The linear calibration method based on the plot of (I₁₀₀–I₀)/(I–I₀) versus the inverse of CO₂ concentration was suggested, where I₀ and I₁₀₀ were luminescence intensities at 613 nm of the CO₂ sensor film in 100% nitrogen and 100% gaseous CO₂. In all cases the plots showed good linearity and the correlation factors of the plots, r², were 0.991 for thymol blue, 0.990 for phenol red, and 0.998 for cresol red. The slopes of the plots (A/B) for thymol blue, phenol red, and cresol red were 2.2, 5.2, and 9.0%, respectively. The response times of the CO₂ sensor film were 4.0 s for thymol blue, 4.4 s for phenol red, and 8.8 s for cresol red for switching from nitrogen to CO₂, and the recovery times of films were 36 s for thymol blue, 39.2 s for phenol red, and 56.6 s for cresol red for switching from CO₂ to nitrogen. The signal changes were fully reversible and hysteresis was not observed during the measurements. The highly sensitive CO₂ sensor was developed using thymol blue as an indicator for the CO₂-sensing probe.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.